home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Aminet 30
/
Aminet 30 (1999)(Schatztruhe)[!][Apr 1999].iso
/
Aminet
/
mus
/
edit
/
OctamedSS1.03c.lha
/
Soundstudio
/
ReadMe_First!
< prev
next >
Wrap
Text File
|
1996-12-18
|
4KB
|
83 lines
Installation notes
~~~~~~~~~~~~~~~~~~
Hard Drive Owners:
To install OctaMED Soundstudio onto a hard drive simply copy
the main contents of this disk into a drawer titled Soundstudio.
However, this will only copy the files required to run the program from
your HD and if you require the docs ( RexxDocs etc ), the OctaMEDPlayer
and the archived omed rexx scripts on your HD partition, you will need
to copy these across manualy from the seperate drawers on the supplied
diskettes and please do remember to unarch the rexx scripts first.
The full helpfile ("HELP" drawer on disk 2), must be placed into
the above main SOUNDSTUDIO drawer and then all you need to do is
press the "HELP" key whilst the program is running and it will load
in and display the instructions so carefully authored by Ed Wiles.
(Thanks Ed)
Finaly, please note that the "Soundstudio.config is set to look for
the helpfiles, ( the one it looks for is titled OctaMED.Guide ), in
your "Work:" partition and if you copy the prog to a HD named other
than "Work" you will need to alter this via an editor or prog like
SID or Dopus and you simply look for a line that says:
helpfile = "Work:OctaMED_Soundstudio/help/OctaMED.Guide"
and alter the "Work" part of the line to your partition, ( ie sys: etc )
Floppy Users:
Before you do anything else you MUST click on the "Floppy_Fonts" and also
the "Floppy_Assigns" otherwise none of the files on here will work.
( You will be required to click on "Floppy_Assign" prior to running
the prog each time you use it, but once the Fonts have been copied
to your FONTS: disk, you need not click upon this icon anymore. )
"Floppy_Fonts" will copy the required fonts from this disk onto your
WB3 or WB2.01 FONTS: disk. There is room as long as you have not
added anything, but you should only do this on backup copies.
"Floppy_Assigns" will do all the necessary assigns to run OctaMED
directly from your floppy drive setup, even if you only have one drive!
( please remember that you need to do this prior to running the program )
If you *still* only have the one WB2.04 disk, you will need to obtain
the later WB2.01 set of disks to use this script, why?, see above/below.
Notes:
If you wish to make use of the notators Compugraphic fonts, you must have
the _bullet font available on your WB3 or WB2.01 FONTS: disk and you will
also need to setup your PrinterGFX controls. ( read owners manual )
( If you only have WB2.04, you cannot make use of the Compugraphic fonts )
We take no responsibity for the scripts not working on a particular
setup, allthough it has been tested with an A1200 and A4000 with
the supplied WB3 disks and on an A2000 with the supplied WB2.01 Disks.
May we suggest that as with your WB disks, you make backup copies of
the supplied OctaMED_Soundstudio disks before you commence using them,
if they become corrupted and you require fresh copies from RBF Software,
you will be required to include £5.00 to cover our time and postage etc!
Finaly:
Due to space restrictions, the Programers drawer containing all Teijos
latest files and libraries have had to be removed from these disks.
However, as it is only a very small minority of users that actualy
require these, they can be obtained from the Aminet server and it's
mirrored sites in the dev/src area and also on our world wide web sites
at: http://www.octamed.co.uk/
If you do not have use of a modem, you can send for the source and
libs player routines disk directly from us by sending £5.00 to cover
the disk, packing and return postage, directly from RBF Software at:
RBF Software, 169, Dale Valley Road, Southampton. SO16 6QX England